Again, thanks to all of you for the patience while I try and get life with a 8-week early baby sorted out!
I’ve got some new, simpler packaging in the spirit of getting these processed and shipped as soon as humanly possible. They should start shipping this weekend!
I’ll be making a quick installation video as per the many requests. Don’t worry, they’re super easy to install, it just requires that you apply it to a good, clean surface. I’ve started including a prep-wipe to help you folks get your micro nice and clean before installation.
I’ve also got a few custom micros brewing using these faceplates (like the Kirby mod). I’ll have pics of those and the faceplates themselves ASAP!
Pockets said:
So when should I pay you that $23? Remember I reserved a solid black faceplate a while back for $10.
LikeLike
juan said:
Hello, I want to order the backlit screen and wire for the gba with the 32 pin connector.
LikeLike
wiggy said:
I’ll be sending invoices out tonight and tomorrow morning for those with partial deposits. They are just about ready to go and should start shipping tomorrow morning 🙂
LikeLike
John said:
Is this something you could do?
http://www.neogaf.com/forum/showthread.php?t=548552
LikeLike
Taylor said:
How do you get the adresses of the people who ordered them?
LikeLike
wiggy said:
Sure! Send a message to me via “how to order” up top and let me know which version you need, what country you’re in, and an email address that I can send a PayPal invoice to and I’ll get you all set up!
LikeLike
Scott Welch said:
when you pay with paypal, it sends the address to wiggy 😉
LikeLike
wiggy said:
Yes, thank you! 🙂
LikeLike
Greg (@FroeyLo) said:
How can you order? I’m definitely interested. Thanks!
LikeLike
Ben said:
Just to make sure, you got my order right? I paid full price I believe.
LikeLike
Corey said:
Haha, it’s cute how everyone who comments always assumes Wiggy can remember them personally. Anyway, very excited to receive my faceplate, looking forward to the application video! Woo!
LikeLike
Pockets said:
The invoice should go straight to my email, right? I still haven’t gotten an invoice.
LikeLike
wiggy said:
If you paid my invoice, then I got it!
I’ve been packing and printing shipping labels the last two days. They’re all going on ASAP!
LikeLike
wiggy said:
What email address am I supposed to send it to? I know just looking at your name that I sent one to ya
LikeLike
wiggy said:
Use the how to order tab up top. Let me know which you’d like, what country you’re in, and an email address that I can send a PayPal invoice to 🙂
LikeLike
wiggy said:
LOL! Too true! I do remember a lot of folks based on email conversations, but definitely not everyone. My head would explode if I were to retain all that info 😛
LikeLike
Kathy said:
I haven’t seen the invoice yet on my email was wondering if you saw them yet. I sent 2 just in case u didn’t see the first one
LikeLike
Pockets said:
I don’t think I ever got one…sorry for being so inconvenient, I hope I’m not paying too late, but I’ll send an Invoice with $23. Sorry it was my fault, maybe I used the wrong email or something, but I’ll get that money to you ASAP. Thanks wiggy.
LikeLike
wiggy said:
Checking emails now. I see one from ya. I’ll get back to you ASAP
LikeLike
wiggy said:
Lemme check on this for ya and I’ll shoot you an email.
LikeLike
Pockets said:
Thank you so much Wiggy! Seriously I appreciate everything you do. Can’t wait to try out this new faceplate
LikeLike
Micah Zumwalt said:
Just wanted to say keep on keeping on mate. Its so tough when you have a newborn in the house. I’m not sure if this is a hobby/business or your primary but don’t put off too much time with the little one, they grow too damn fast.
Gosh, I’m 26 and and feel like I’m an old man. Kids’ll do it.
LikeLike
Kathy said:
Thank you! When u respond to it will I see it in my email?
LikeLike
juan said:
I haven’t gotten an invoice for my backlit kit 32 pin connector
LikeLike
ʎʞs said:
Got my tracking number yesterday. Very excited!
LikeLike
Greg (@FroeyLo) said:
I sent an email last week (maybe 2) and haven’t heard anything. I just want to make sure there are still some faceplates available. Thanks Wiggy!
LikeLike
wiggy said:
No prob!
LikeLike
wiggy said:
Yup!
LikeLike
wiggy said:
I’m like permanently behind on emails LOL! I answer a ton each day, then more just roll in.
I have plenty left! I will likely be listing them on eBay while I work on getting the site setup for orders so you guys and gals can get em without all the headache of emailing me and whatnot.
But, I will get back to ya. Just takes a few days sometimes
LikeLike
wiggy said:
Thanks!
Yeah, this is it for me, business-wise. Going through some growing pains for sure, along with having the baby a tad early, but I feel confident about the direction I’m headed.
I’ve got a plan down on paper and will working extremely hard over the next month or two in order to revamp the site, my process, the products and services, etc. lots of good things to come! 😀
Now I just gotta figure out what jobs Oscars can do to help out besides be adorable and make funny noises 😛
LikeLike
wiggy said:
I’ll get it to ya ASAP. I’m still playing catchup.
I’m actually out of stock and awaiting the next shipment, so it wouldn’t ship for a bit anyway.
LikeLike
wiggy said:
😀
LikeLike
Ludley Neto said:
Hi Buddy!
Amazing site. Did you have some prediction when you will open for custom faceplate orders?
I had one great ideia here, and I think will be awesome on my GBM.
(And congratilations for the baby man! I`m waiting mine son in the moment =D )
LikeLike
wiggy said:
I’m not really sure. I’m running into an issue with being able to meet demand using the current manufacturing method, so I’m doing some research in order to see if I can’t get these produced in higher volume and possibly with a different method. I’ll post updates as they come down the pipeline.
LikeLike
Dave said:
Not sure if I’m just a re-re but I can’t find anywhere on your page about how to browse, get pricing on, or order the faceplates you have available. A previous post said to check the How-To but I found nothing there either.
Please let me know how to see what you have and place an order. My Micro has had a terribly scuffed faceplate since I got it (looks like a 20 year old head light) and I would much rather go through you than some big ebay seller in probably China to get a replacement because you seem to really care about this and the people you’re helping and that’s unfortunately rare these days.
Any advice?
Thanks.
LikeLike
adizzles said:
Hi Dave,
here’s the store address: http://rosecoloredgaming.com/micro-accessories.html but we are just about sold out of them. We are in the process of restocking and Wiggy or I will post here when they are back and available. 🙂
LikeLike